Tap Truth EPA drinking water records, in plain English

Public water system record

Shuler Point Water System

Serves an area of Bosque County, TX · 33 people served

Federal records show 8 health-based violations and 11 monitoring/reporting issues for Shuler Point Water System in the last ten years. The most serious issue in this window was a resolved LEAD AND COPPER RULE REVISIONS violation.

  • TX0180041
  • CLIFTON
  • TX
  • 33 served

System profile

Source water Groundwater
ZIP 76634
EPA system ID TX0180041

Verify this system on EPA ECHO →

Health-based violations, last 10 years
8
Resolved
8
Unresolved
0
Any acute record
No
Monitoring issues, last 10 years
11

Key facts

  • Shuler Point Water System draws water from 1 well.
  • Highest measured level in the last 10 years: Fluoride, 5.2 mg/L, federal limit 4 mg/L (1.3 times the limit), 2023.
  • Record on file since 1993, with 0 health-based violations before October 19, 2016.
  • Lead pipe inventory: 0 lead and 0 unknown out of 16 service lines.

Check whether Shuler Point Water System serves your address

Address suggestions by Mapbox

Health-based violations

Since October 2016

Violation data reflects EPA records through March 2026. For the most current status, visit the EPA ECHO database.

Contaminant Rule family Start date Status Acute
LEAD AND COPPER RULE REVISIONS
Treatment technique failure
 350 Oct 17, 2024 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.4 mg/L, federal limit 4 mg/L (1.1 times the limit)
 330 Jan 1, 2024 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.8 mg/L, federal limit 4 mg/L (1.2 times the limit)
 330 Oct 1, 2023 Resolved No
Fluoride
Contaminant limit exceeded
Measured 5.2 mg/L, federal limit 4 mg/L (1.3 times the limit)
 330 Jul 1, 2023 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.5 mg/L, federal limit 4 mg/L (1.1 times the limit)
 330 Apr 1, 2023 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.1 mg/L, federal limit 4 mg/L (at or just above the limit)
 330 Oct 1, 2019 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.3 mg/L, federal limit 4 mg/L (1.1 times the limit)
 330 Oct 1, 2017 Resolved No
Fluoride
Contaminant limit exceeded
Measured 4.1 mg/L, federal limit 4 mg/L (at or just above the limit)
 330 Jul 1, 2017 Resolved No

Monitoring and reporting issues

Since October 2016

Missed tests or reports, not contaminants found above a limit.

Issue Start date Status
Consumer Confidence Rule
OTHER
 Jul 1, 2025 Active
LEAD AND COPPER RULE REVISIONS
RPT
 Oct 17, 2024 Resolved
Consumer Confidence Rule
OTHER
 Jul 1, 2024 Resolved
Public Notice
OTHER
 Jun 2, 2024 Resolved
Public Notice
OTHER
 Feb 1, 2024 Resolved
Revised Total Coliform Rule
Monitoring violation
 Jan 1, 2023 Resolved
Lead and Copper Rule
Monitoring and reporting
 Dec 30, 2021 Resolved
Lead and Copper Rule
Monitoring and reporting
 Oct 1, 2020 Resolved
Lead and Copper Rule
Monitoring and reporting
 Oct 1, 2019 Resolved
Consumer Confidence Rule
OTHER
 Jul 1, 2019 Resolved
Chlorine
Monitoring and reporting
 Jan 1, 2018 Resolved

Full record since 1993

EPA's records for Shuler Point Water System go back to 1993. Before October 19, 2016 they list no health-based violations and 14 monitoring or reporting violations.

Violations that began in Health-based Monitoring and reporting
1990s 0 2
2000s 0 4
2010 to October 18, 2016 0 8
October 19, 2016 to 2019 3 3
2020s 5 8

What the violations mean

Fluoride

7 incidents

Fluoride exceeded the federal limit

Excessive fluoride can cause dental and skeletal fluorosis

LEAD AND COPPER RULE REVISIONS

1 incident

The system did not complete a treatment step or action that the LEAD AND COPPER RULE REVISIONS requires (a treatment technique violation).

The utility had to notify customers about this violation.

Where the water comes from

Shuler Point Water System draws water from 1 well.

Annual water quality report

Shuler Point Water System must give its customers an annual water quality report (Consumer Confidence Report) by July 1, with the levels its tests found in the previous year.

Systems serving 500 or fewer people may meet the rule by telling customers the report is available on request, so you may need to ask Shuler Point Water System for a copy.

Find a posted report with EPA's Consumer Confidence Report search

Testing your own water

To test the water at your tap, or a private well this record does not cover, use a laboratory certified for drinking water by Texas.

Certified drinking water labs by state EPA guidance for private wells